Outdoor Living Today MAX66 Manuel d'utilisation et d'entretien télécharger pdf (Page 22)

50. Attach Rear Filler

Trim (3/4” x 2 1/2” x 75”) to

rear walls in each corner.

Hammer with 6 - 1 1/4”

finishing nails. Strips are

positioned flush with siding

and bottom Skirting.

bottom skirting

Rear

51. Attach Side Rear Wide

Trims (1/2” x 4 1/2” x 77 1/2”)

over filler trim. Use 8 - 1 1/4”

finishing nails per piece. Once

again, edge of trim should be

flush with wall siding. See

Step 52 for corner trim alignment.

flush with wall siding

48. Position Front Skirting (3/4” thick)

between Door Trims aligning it even at top edge

with floor. Use 6 - 1 1/4” nails to secure.

49. Attach Side and Rear Skirting around the base

of the shed. Skirting will hide floor framing. The side

skirting pieces will meet together in the

center. Gaps on outside will be covered by Wide Trim

pieces later. Use 4 - 1 1/4” nails to secure.

Further secure bottom siding to wall framing in

corners on each wall panel with 2 - 1 1/4” nails.

4 1/2”

1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 22

Additional 1 1/4” nails in

each corner to secure wall

siding to framing.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29

Pas de commentaire

Outdoor Living Today MAX66 Manuel d'utilisation et d'entretien Page 22