Outdoor Living Today MAX66 Manuel d'utilisation et d'entretien télécharger pdf (Page 14)

29. Temporarily attach Gable to walls and top plate with 2 - 2” screws. Screw from the bottom of

gable framing down into Top Plate and Wall. Gables may need slight adjustment in Step 40 and then

be completely attached with an additional 6 - 2” screws. Position 2nd Gable on side walls.

28. Place Gable so framing sits flush with the inside of the top plate. Center from front to rear using a

Straight Edge to confirm angle of gable frame and Top Plate line up. Adjust gable accordingly. From the

outside, make sure gable flashing overhangs wall siding.

1x3 Gable Framing

Straight Edge

Gable Flashing

30. Position and temporarily attach 2nd Gable as per Steps 28-29.

1-888-658-1658 www.outdoorlivingtoday.com sales@outdoorlivingtoday.com

Page 14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 28 29

Pas de commentaire

Outdoor Living Today MAX66 Manuel d'utilisation et d'entretien Page 14